Additional Information For Hdmi; Optional Equipment Connection; Hdmi Connection - LG NB4540 Owner's Manual

16
Additional information for
HDMI
y When you connect an HDMI or DVI compatible
device make sure of the following:
- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then switch
on this player.
2
- The connected device's video input is set
correctly for this unit.
- The connected device is compatible with
720 x 576p, 1280 x 720p, 1920 x 1080i or
1920 x 1080p video input.
y Not all HDCP-compatible HDMI or DVI devices
will work with this player.
- The picture will not be displayed properly with
non-HDCP device.
,
y If a connected HDMI device does not accept
y Changing the resolution when the
y When the HDMI connection with HDCP
y If there are noises or lines on the screen,
y You cannot change the video resolution
y If the video output signal is abnormal when
NB5540-NE.DGBRLLF_ENG.indd 16
Downloaded from www.Manualslib.com
Connecting
Note
the audio output of the player, the HDMI
device's audio sound may be distorted or
may not output.
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft).
in the HDMI IN mode. Change the video
resolution of the connected component.
your personal computer is connected to
HDMI IN jack, change the resolution of your
personal computer to 576p, 720p, 1080i or
1080p.
manuals search engine
Optional equipment
connection

HDMI connection

For enjoying sound only
You can enjoy the sound from the external device
you connect.
To the Blu-ray disc player,
DVD player, etc.
1. Connect HDMI IN jack on the back of the unit to
HDMI OUT jack on the audio device such as Blu-
ray disc player, DVD player, etc.
2. Set the INPUT source to HDMI IN. Press
repeatedly FUNCTION on the remote control or
F on the unit until the function is selected.
2014-07-23 11:58:18