Ordering Spare Parts; Photo Used In This Manual; How To Read This Service Manual; Using Icons - Haier HL19K2A Service Manual

Lcd
Hide thumbs Also See for HL19K2A:
Table of Contents

Advertisement

Service Manual
Model No.: HL19K2
3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.
4. Use only an anti-static type solder removal device. Some solder removal devices not
classified as "anti-static" can generate electrical charges sufficient to damage ES devices.
5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to
damage ES devices.
6. Do not remove a replacement ES device from its protective package until immediately before
you are ready to install it.
(Most replacement ES devices are packaged with leads electrically shorted together by
conductive foam, aluminum foil or comparable conductive material).
7. Immediately before removing the protective material from the leads of a replacement ES
device, touch the protective material to the chassis or circuit assembly into which the device will
be installed.
CAUTION:
Be sure no power is applied to the chassis or circuit, and observe all other safety
precautions.
8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise
harmless motion such as the brushing together of your clothes fabric or the lifting of your foot
from a carpeted floor can generate static electricity sufficient to damage an ES device.)

1-3-7. Ordering Spare Parts

Please include the following informations when you order parts. (Particularly the Version letter)
1. Model number, serial number and software version
The model number and serial number can be found on the back cover of each product. Software
version can be found in the Spare Parts List.
2. Spare part No. and description
Spare part No. and description can be found in the Spare Parts List.

1-3-8. Photo used in this manual

The illustration and photos used in this Service Manual may not base on the final design of
products, which may differ from your products in some way.

1-4. How to Read this Service Manual

1-4-1. Using icons:

Icons are used to attract the attention of the reader to specific information. The meaning of each
icon is described in the table below:
Note:
A "note" provides information that is not indispensable, but may nevertheless be
valuable to the reader, such as tips and tricks.
6

Advertisement

Table of Contents
loading

Table of Contents