Remove The Pedestal; Remove The Main Board - Haier HL19K2A Service Manual

1.1 Remove the Pedestal

Lay down the unit so that rear cover
downward
Remove the two screw from the
pedestal indicated with
Then remove the pedestal
1 2Remove the Front Cover
Remover the eight screw indicated with
Turn to front cover upwards
Then remove the front cover from the unit
1 3Remove the LCD panel
Remover the six screw indicated with
Remover the pin indicated with
Then remove the panel
1
Remover the two screw indicated with
Remover the four screw indicated with
Then remove the Main Board

Service Manual
Model No.: HL19K2

Remove the Main Board