Specifications - Sony CMT-SBT40D Operating Instructions Manual

 BLUETOOTH devices connected with this system
must comply with the BLUETOOTH specification
prescribed by the BLUETOOTH SIG, Inc., and
must be certified to comply. However, even
when a device complies with the BLUETOOTH
specification, there may be cases where the
characteristics or specifications of the
BLUETOOTH device make it impossible to
connect, or may result in different control
methods, display or operation.
 Noise may occur or the audio may cut off
depending on the BLUETOOTH device connected
with this system, the communications
environment, or surrounding conditions.

Specifications

Amplifier section
Power output (rated):
20 watts + 20 watts (at 8 ohms, 1 kHz, 1%
THD)
RMS power output (reference):
25 watts + 25 watts (per channel at 8 ohms,
1 kHz)
Inputs/Outputs
AUDIO IN:
AUDIO IN (external input) jack:
Stereo mini jack, sensitivity 1 V, impedance
47 kilohms
USB:
USB port: Type A, 5 V DC 1.5 A
 (HEADPHONE) jack:
Stereo standard jack, 8 ohms or more
VIDEO OUT:
Max. output level 1 Vp-p,
unbalanced, sync negative, load
impedance 75 ohms
SPEAKERS:
Accepts impedance of 8 ohms
Disc player section
System:
Compact disc and digital audio and video
system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 1000 μW
* This output is the value measurement at a
distance of 200 mm from the objective lens
surface on the Optical Pick-up Block with 7 mm
aperture.
Frequency response
DVD (PCM 48 kHz): 20 Hz – 20 kHz (±1 dB)
CD: 20 Hz – 20 kHz (±1 dB)
37 GB