Bluetooth ® Player; Remote Control - Peavey PXR 1506 Operating Manual

Bluetooth ® Player
Bluetooth OPERATION
To listen to your music via Bluetooth wireless connection, you need to pair (link) your PXR
Bluetooth phone and/or music device.
1. Turn off any Bluetooth devices previously paired with your PXR 1506/1508 mixer.
2. Turn on the Bluetooth feature on your phone or music device.
3. Press the mode button until the Bluetooth symbol appears in the upper left hand corner of the LCD display.
4. Place your phone or music device in Bluetooth search mode.
5. Select Bluetooth audio from search results on your phone or music device.
6. Select OK or YES to pair your speaker system with your phone or music device.
When your PXR 1506/1508 successfully pairs and connects with your phone or music device, the LCD display will indicate
the name of the device connected. You will now be able to play music from your connected music source through your PXR
1506/1508. The level can either be adjusted from the connected source or by the MP3 Volume control.
* Wireless range can vary depending on Bluetooth class of source device, and be subject to interference from obstructions
such as walls or other electronic devices.

Remote Control

For ease of use and convenience, a remote control comes with the PXR 1506/1508 mixer (battery included). To replace the
battery, push in left tab and pull out. Use only a CR2025 model battery as a replacement.
NOTE: For proper use, do not block the IR Receiver.
PLAY/PAUSE: A short press of the PLAY/PAUSE button causes the operation to change from PLAY to PAUSE or
from PAUSE back to PLAY
CH- / CH+: Channel adjustment buttons.
EQ: EQ Preset adjustment button.
- / +: Volume adjustment buttons.
I<< / >>I: Track skip buttons let you select the track to play.
0-9: Directly access tracks.
PICK SONG: N/A on this model
ENTER: Enters the settings menu.
MODE: Toggles between the USB input, SD card input and Bluetooth.
1506/1508 mixer with your
™