Using More Than One Cordless Phone - AT&T MLC-6 Quick Reference Manual

Handset
Hook
Rotate for wall
mounting.
Base
Ringer
Rings when a call
comes in. Adjust
volume or turn ringer
off using the Ringer
Volume Controls.

Using more than one cordless phone

When using more than one MLC-6 phone, program each to operate
on different channels. See Installation and Troubleshooting guide.
AT&T 999-506-146
Comcode 106420292
Base Unit
Controls
Telescoping
Antenna
Extend fully when
using handset.
Battery Charging
Contacts
Handset batteries charge
through these contacts. Clean
periodically by rubbing them
with a soft gum eraser.
Base Extension
Label
Write this phone
extension number on this
label using a pencil or
ball-point pen only.
Talk
Indicator
Lights when handset
is removed from base
and switched ON.
Charge
Indicator
Lights when handset
is properly placed on
base and batteries
are charging.
Message
Indicator
Lights when someone
signals you using
PARTNER Plus
System's Message
Light On feature.
Ringer Volume
Controls
Press apppropriate button
to adjust base's ringing
volume. Base ringer
turns off at bottom of
range (unless handset is
on the base). When the
handset is on the base,
only the base rings.
When handset is off the
base, both base and
handset ring.
Issue 1 (October 1990)
Copyright © 1990 AT&T