1100 System Board - Lenovo y700-15 Hardware Maintenance Manual

ideapad Y700-15ACZ/Y700-15ISK/Y700 Touch-15ISK/
Y700-17ISK Hardware Maintenance Manual

1100 System board

For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 38
• "1030 Solid state disk and hard disk drive" on page 40
• "1040 PCI Express Mini Card for wireless LAN" on page 43
• "1060 LED board" on page 46
• "1070 Subwoofer" on page 47
• "1080 USB board" on page 48
• "1090 Fan assembly and Heat Sink assembly" on page 50
Figure 10. Removal steps of system board
Disconnect the connectors in the directions shown by arrows 1, 2 and 3.
Remove the screws 4 and 5.
ideapad Y700-15ACZ/Y700-15ISK/Y700 Touch-15ISK
52
Important notices for handling the system board:
When handling the system board, bear the following in mind.
• Be careful not to drop the system board on a bench top that has a hard surface,
such as metal, wood, or composite.
• Avoid rough handling of any kind.
• During the whole process, make sure not to drop or stack the system board.
• If you put a system board down, make sure to put it only on a padded surface such
as an ESD mat or conductive corrugated material.