Toyota Avalon 2008 Quick Reference Manual page 78

Recalling the memorized position
n
Check that the shift lever is set in "P".
STEP 1
Switch to ON mode.
STEP 2
Linking driving position memory with door unlock operation
(vehicles with smart key system)
Memorized driving positions can be recalled when you unlock the
driver's door using the entry function or wireless remote control and
open the driver's door.
n Setting the linked door unlock operation
STEP 1
Set the driving positions into the memory system using the "1"
or "2" buttons. (→P. 50)
STEP 2
Turn the "ENGINE START STOP" switch to the OFF mode,
then close the driver's door.
STEP 3
1-3. Adjustable components (seats, steering wheel, mirrors)
Push button "1" or "2" to recall
the memorized position.
Push the "1" or "2" button on the
driver's side and the
on the wireless remote control at
the same time for about 1 sec-
ond until you hear a beep.
1
button
51