Toyota Avalon 2008 Quick Reference Manual page 183

Dynamic laser cruise control warning lights, display and buzzers
n
Warning lights, display and buzzers are used to indicate a system malfunc-
tion or to alert you to the need for caution while driving.
The warning codes indicate the following.
Warning code
C1
C2
E3
(Flashing)
If the same code appears again after implementing the correction procedure,
or if the cruise control cannot be set, contact your Toyota dealer.
Switching modes
n
The mode cannot be switched to constant speed control mode if vehicle-to-
vehicle distance control mode has been used. The mode also cannot be
switched from constant speed control to vehicle-to-vehicle control mode.
Turn the system off by pressing the "ON-OFF" button, and turn it on again.
Details
Indicates that the laser
radar sensor is dirty or
covered with ice.
Indicates that the system
is unable to judge the vehi-
cle-to-vehicle distance.
Indicates that a system
malfunction has been
detected.
2-4. Using other driving systems
"CRUISE" indicator light
Master warning light
Warning code
Correction procedures
Clean the sensor.
• Stop the wiper or switch
the wiper to variable inter-
mittent operation.
• Avoid direct sunlight.
• Wait until the weather
becomes clear.
Turn off and restart the
"ENGINE START STOP"
switch or the engine
switch.
2
157