Dhcp Table; Dhcp Relay - D-Link DSL-2700U User Manual

the network as it boots up. A device must be configured as a DHCP
client to obtain the IP address automatically. The DHCP address pool
contains the range of the IP address that will automatically be
assigned to the clients on the network.
The following table describes the labels in this screen.
LABEL
Enable DHCP Server
DHCP IP Address Range
DHCP Lease Time
When you are making changes, click on Save Settings to save your
changes.

DHCP Table

The following table describes the labels in this screen.
LABEL
Host Name
IP Address
MAC Address
Status

DHCP Relay

Select whether you can acquire an IP address automatically.
Enter the IP address range you wish to use as the DHCP server's IP
assignment.
Enter the amount of time you wish to lease out a given IP address.
Show the hostname of LAN PC here.
Show the LAN PC's IP obtained from DHCP server.
Show the LAN PC's MAC address.
Show the status of obtained IP address from the DHCP server.
23
DESCRIPTION
DESCRIPTION