14
Handling Paper
6
7
Align the paper sprocket holes with
the tractor pins, then close the tractor
cover.
Tractor covers
o
Adjust the tractors to remove any
slack.
& Lock the tractor clamping levers.
clamping
levers
I
Note:
• Make sure the paper is straight.
8
Press [LOAD/PARK).
This will load the paper to the first print line.
9
Raise the top cover.
This is done by inserting the side pins of the top
cover into the slots in the upper cabinet.
Top cover
~---)-
1 0
Raise the paper support.
11
12
Paper support
Insert the paper support into the slot
of the extension plate until it stops .
If the ON LINE indicator is not lit,
press
I
ON LINE) to get ready to
print.