Epson Expression Photo XP-960 User Manual page 246

8. Insert the ink cartridge head first into the ink cartridge holder. Then press the bottom of the ink
cartridge down until it clicks into place.
9. Once you replace all the cartridges that need replacing, close the scanner unit.
The product starts charging the ink. This takes a few minutes. When you see a completion message
on the LCD screen, ink replacement is complete.
Note: Do not turn off the product while it is charging or you will waste ink. If you see an error screen
telling you an ink cartridge is installed incorrectly, lift up the scanner unit and press the ink cartridge
down until it clicks into place. When you're finished, close the scanner unit.
If you remove a low or expended ink cartridge, you cannot re-install and use the cartridge.
Caution: If you remove an ink cartridge for later use, recap the ink cartridge using the cap that came
with it to prevent the ink from drying out and to protect the surrounding area from getting smeared by ink.
Store the ink cartridge in the same environment as the product. Do not leave the product with the ink
246