DIGITAL MULTIMETER DDM450 DDM450 SERVICE Thank you for purchasing our product! As our customers are our top priority and we strive for 100% satisfaction, we would appreciate your feedback on the product. Please contact our customer service department at (310) 728-6220 or at www.dawsontools.com if you have any questions regarding this product.
LIMITED WARRANTY AND INTRODUCTION LIMITATION OF LIABILITY DDM450 is a stable, safe, reliable compact digital handheld 6000 count This instrument from Dawson Tools Inc. will be free from defects in auto-ranging multimeter. This meter can measure AC/DC voltage, AC/DC workmanship and material for three years from the date of original current, resistance, continuity, diodes, non-contact voltage, and battery purchase.
NCV indicator will light up if voltage is detected. Release the “NCV” button to stop NCV detection. 6.Rotary Switch 7.Input Jack (all measurements; current below 600mA) 8.A Jack (current measurements between 600mA-10A only) 9.Common Jack (all measurements) DDM450...
ROTARY SWITCH FUNCTIONS 1. DC Voltage:<600V Data Hold Alternating Current Diode Test Negative DC Value Continuity Test Direct Current DDM450 Resistance Low Battery DC/AC Current Auto Power Off 1.Turn rotary switch to DC voltage position. DC/AC Voltage Auto Range Active 2.Connect leads across voltage source/load.
Page 5
3. DC /AC Current (large):<10A 6.1 Continuity: DDM450 DDM450 1.Turn rotary switch to multifunction position 1.Turn rotary switch to A position. 2.Press FUNC to switch to continuity mode 2.Press FUNC to select DC or AC current. 3.Connect leads across circuit.
Specifications • Operating Altitude: 2000m • Relative Humidity: 75% max • Operating Temperature: 0°C~40°C/32°F~104°F (<80% RH) DDM450 • Storage Temperature: -10°C~60°C/14°F~140°F (<70% RH) • Accuracy Temperature: -18°C~28°C/64°F~82°F (<80% RH) • Temperature Coefficient: 0.1x(specified accuracy)/°C (<18°C or >28°C) 1.Turn rotary switch to 1.5V battery test position.
Page 7
AC Voltage Measurement Current Measurement Range Accuracy Range Accuracy Resolution Resolution 0.001V 400 A µ 0.1µA 0.01V 4000µA 1µA ±(1.0% of reading +10 digits) ±(1.8% of reading +3 digits) 400V 0.1V 40mA 0.01mA 600V 400mA 0.1mA ±(2.0% of reading +8 digits) 10mA •...
Diode Test REPLACING THE BATTERY Description Resolution Display shows the forward-biased WARNING 0.001V voltage drop of the diode. To avoid false reading that could lead to injury or damage to the • Overload protection: 600V rms meter, replace the batteries as soon as the “ ”...