Table of Contents LIMITED WARRANTY AND LIMITATION OF LIABILITY ........... 3 Out of the Box ..........3 Accessories ..........4 Safety Information ........4 Certification ..........8 INTRODUCTION ........... 8 Overview ............. 8 Components and Buttons ......9 Components ..........9 Buttons and Symbols ......
Page 3
Switch between Functions ......14 Backlight ........... 14 Auto Off ............ 14 NCV (Non-Contact Voltage Detector) ..14 DC and AC Voltage Measurement .... 15 Resistance ..........16 Continuity ..........16 Diode ............16 Capacitance ..........17 Frequency and Duty Ratio ......17 Current ............
LIMITED WARRANTY AND LIMITATION OF LIABILITY This instrument from Dawson Tools Inc. will be free from defects in workmanship and material for three years from the date of original purchase. This warranty does not cover defects resulting from damage caused by the user such as drops, neglect, misuse, unauthorized alteration, usage outside of specified conditions, contamination, or improper repair/maintenance.
Accessories Test Leads 1 pair 9V 6F22 Battery User’s Manual Safety Information WARNING TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, PRODUCT DAMAGE OR PERSONAL INJURY, PLEASE FOLLOW THE SAFETY INSTRUCTIONS DESCRIBED IN THE USER MANUAL. READ THE USER MANUALS BEFORE USING THE METER.
Page 6
Avoid shaking, dropping or any kind of impacts when using or transporting the Meter. To avoid electric shock or personal injury, repairs or servicing not covered in this manual should be performed only by qualified personnel. Avoid direct exposure to sunlight to ensure extended life of the Meter.
Page 7
Check the test leads before operation. Leads must be in good condition; check if leads are well covered by insulator, and if wires are not exposed. Use the original test leads included in the package for best performance and safety. If necessary, use the compatible leads with same specifications of the originals’.
Page 8
Always be careful when working with voltages above 60V DC or 30V AC RMS. Keep fingers behind the probe barriers while measuring. Never connect the Meter leads across a voltage source while the rotary switch is in the resistance, diode or continuity mode. Doing so can damage the Meter.
The Meter is compiled to EMC requirements. Introduction Overview Dawson DDM230C is a portable, hand-held yet professional meter that features True RMS measurement display, AC/DC current, AC/DC voltage, Frequency, Capacitance, Resistance, Continuity, Duty Ratio, and Diode Testing. This Meter is easy to use even with one hand, suitable for professional users or amateurs, and ideal for school or home use.
Buttons and Symbols HOLD button: to hold the reading. FUNC button: to switch between functions. RANGE button: to set the range for manual or auto measurement. REL button: for relative measurement. Hz/% button: to switch between Frequency and Duty Ratio. MAX/MIN button: to switch between Maximum and Minimum measurement.
LCD Display Alternating Current Direct Current Diode, Continuity AUTO Auto Mode Maximum Measurement Displayed Minimum Measurement Displayed Relative Measurement Mode Auto Power Off Battery Low Display Hold...
Percentage(Duty Ratio) mV, V MilliVolt, Volt(Voltage) Amp(Current) nF,μF, mF Nanofarads, Microfarads, Millifarads Ω, kΩ, MΩ Ohms, Kilohms, Megaohms Hz, kHz, Hertz, Kilohertz, Megahertz Non-Contact Voltage USB Mode Using the Meter Display Hold During measurement, press “HOLD” button to hold the current reading on the display.
measuring range and will return to minimum range after maximum has been reached. Hold “RANGE” for 1 second to switch back to Auto mode. If the Meter in in Max/Min mode. Press “RANGE” to return to Normal mode. Note: Manual mode is not allowed in frequency measurement.
Switch between Functions During Voltage or Current measuring, press “FUNC” button to switch between AC and DC measurements. When measuring Resistance, Diode or Continuity, press “FUNC” will switch between these modes. Backlight Press “ ” to turn on/off the display backlight. Auto Off If the Meter is not in use for 30 minutes, the Meter turns off automatically to conserve power.
WARNING EVEN THOUGH THERE IS NO INDICATION, VOLTAGE MAY STILL EXIST. THE MEASUREMENT MAY BE AFFECTED BY THE DESIGN OF THE OUTLET, TYPE OF INSULATION AND OTHER EXTERNAL FACTORS. NOTE: The voltage sensing indicator may turn on when a voltage is fed to the Meter.
NOTE : 660mV range is only accessible in Manual Mode. Resistance Turn the rotary switch to . Connect the black lead to input COM and the red lead to . Use both leads to test the target resistance and read the measurement from the display.
Capacitance Turn the rotary switch to .Connect the black lead to COM and the red lead to . Use both leads to test the target capacitor and read off the capacitance from the meter. Frequency and Duty Ratio Turn the rotary switch to “Hz%”. Connect the black lead to COM and the red lead to Hz.
Specifications General Specifications Full time surge protection. Maximum Voltage range between target and ground: 600V DC or AC. Maximum working height: 2000m. Maximum display number: 6599. Auto Polarity Indication, ‘-’indicates negative. Overload Indication: ‘0L’or ‘-0L’. ...
Technical Specifications Environmental Temperature: 749°F, relative humidity: <75% Features of True RMS For non-sinusoidal signal measurement, the Meter provides more accurate measurement than the traditional averaging method. If in AC current mode, the Meter may display a random reading between 1 and 50 when the input is not active.
Page 21
Maximum Input Voltage : 600V DC AC Voltage Range Resolution Accuracy ( 1.5% + 5 Counts ) 660mV 0.1mV 6.6V 0.001V ( 1.2% + 5 Counts ) 0.01V ( 1.5% + 5 Counts ) 600V 0.1V ...
Page 24
Frequency Through V or Current Mode Range Resolution Accuracy 66Hz 0.01Hz 660Hz 0.1Hz ( 1.5% + 5 Counts ) 6.6kHz 0.001kHz 10kHz 0.01kHz Range : 10Hz ~ 10kHz Input Voltage : ≥ 0.2V AC (Input voltage should increase along with the frequency) Through Hz Mode Range...
Page 25
Duty Ratio Range Resolution Accuracy 2.0% 10 - 95% 0.1% Open Circuit Voltage : 1.2V Overload Protection : 250V DC/AC (RMS) DC Current Range Resolution Accuracy 660A 0.1A 6600A 1A ( 1.0% + 5 Counts ) 66mA 10A 660mA...
Page 26
AC Current Range Resolution Accuracy 660A 0.1A 6600A 1A ( 1.5% + 5 Counts ) 66mA 10A 660mA 100A 10mA ( 3.0% + 5 Counts ) Overload Protection: In A and mA range, Fuse: FF600mA/1000V. In A Mode: Fuse: FF10A/500V. When the target current is larger than 5A, do not continue the measurement for more than 10 sec.
Maintenance and Repair Battery Replacement WARNING TO AVOID ELECTRICAL SHOCK, PRODUCT DAMAGE OR PERSONAL INJURY, REMOVE TEST LEADS BEFORE OPENNING BATTERY COVER. ”is Replace batteries when the battery indicator“ on. Remove the battery cover and replace a new battery.
WARNING REPLACE TEST LEADS WITH IDENTICAL OR COMPATIBLE LEADS. LEAD SPEC:1000V 10A. Replace new leads if the current leads worn. Contact Dawson Dawson Tools, Inc. 1142 S. Diamond Bar Blvd., #858 Diamond Bar, CA 91765 Phone: (310) 728-6220 www.DawsonTools.com Do not recycle...
(Back Page) Features LCD Display Auto Ranging Relative Measurement Non-Contact Voltage Detector True RMS Diode Test Continuity Buzzer MAX/MIN Display Data Hold Auto Power Off Low Battery Back Light...