Hitachi DH 24PF3 Technical Data And Service Manual page 11

G. Grooving (hammering only)
Grooving chisel
(SDS-plus shank)
Code No. 316659
H. Drilling holes and driving screws (rotation only)
Drill chuck, chuck adapter (G), special screw and chuck wrench
Special screw
a.
Chuck adapter (G) for SDS-plus shank system
b.
13 mm (1/2") Drill chuck 13VLRB-D (with chuck wrench)
c.
Special screw (M6 left-hand threaded)
(1) Cross-recessed head (Phillips) bit
[Overall length: 70 mm]
(For use with cross-recessed head (Phillips) screw)
Stamped bit No.
Code No.
Bit No. Applicable screw dia. (mm)
No. 2 955654
No. 3 955655
13 mm (1/2") Drill chuck
(13VLRB-D)
(Note)
If the tool is to be used for loosening screws, open the three jaws
of the drill chuck and securely fix the drill chuck to chuck adapter
(G) with the special screw (a left-hand threaded M6 screw) when
mounting the drill chuck onto chuck adapter (G).
Chuck wrench
Part name
4 --- 5
6 --- 8
Chuck adapter (G)
(SDS-plus shank)
Code No.
303623
321814
981122
(2) Slotted-head (minus) bit
[Overall length: 50 mm]
(For use with slotted-head (minus) screw)
Tip thickness
Bit tip thickness Code No.
0.8 955658
1 955673
--- 8 ---
Applicable screw dia. (mm)
4
5 --- 6