Leica S8 APO B User Manual page 36

Dioptric correction with two adjustable eyepieces (continued)
3. Place a flat specimen under the objective.
4. Set the lowest magnification level.
5. Observe the specimen through the
eyepieces and bring it into sharp focus with
the focusing drive.
Leica S Series
6. Set the highest magnification level.
7. Optimize the focusing with the focusing
drive.
8. Set the lowest magnification level.
User Manual
9. Turn the eyelens of the eyepiece as far as it
will go in the "+" direction, without looking
into the eyepieces while doing so.
10. Look through the eyepieces and close one
eye.
11. With the other eye, monitor the specimen
and turn the eyelens of the eyepiece slowly
in the "–" direction, until this eye sees the
specimen sharply.
12. Repeat steps 10 and 11 with the other eye.
Continued on next page
36