Removing The Memory Module - Zotac ZBOX User Manual

ZOTAC ZBOX
2. Gently press down on the memory module until it locks into place by the arms
of the memory slot.
Note: This ZOTAC ZBOX accomodates two DDR3/DDR3L SO-DIMM memory modules. You must install
at least one module in one of the two slots.

Removing the memory module

1. Locate the SO-DIMM memory slot and gently press the two arms securing the
memory module outwards, as shown in the image below, to release the
memory module.
2. Remove the memory module from the slot at a 45-degree angle.
10