Specifications; General Instructions - Waterite FUSION2 F Series Owner's Manual

CONTROL VALVE SPECIFICATIONS
SERVICE FLOW RATE & PRESSURE LOSS
(valve only, including bypass valve, but not
including mineral, etc.)
BACKWASH FLOW RATE & PRESSURE LOSS
(whole conditioner...including bypass valve)
MINIMUM & MAXIMUM OPERATING
PRESSURE
MINIMUM & MAXIMUM OPERATING
TEMPERATURE
CURRENT DRAW & VOLTAGE
REGENERANT TANK REFILL RATE
INLET / OUTLET FITTING TYPES
DISTRIBUTOR TUBE
TANK THREAD
PC BOARD MEMORY
COMPATIBLE REGENERANTS
COMPATIBLE CHEMICALS
During operation, the normal user displays such as time of day, gallons or days remaining before regeneration
(optional), and salt warning (optional), are shown. Each of these can be viewed by pressing NEXT to scroll through
them. When moving through any displays or programming, if no buttons are pressed within five minutes, the display
returns to normal operating displays. Any changes made prior to the five minute time out are incorporated.
To quickly exit any Programming, Installer Settings, etc., press SET CLOCK. Any changes made prior to the exit
are incorporated.
If desired, two regenerations within 24 hours are possible with a return to the preset program. To do a double
regeneration if the control valve is factory set to "NORMAL" or "NORMAL + on 0" (see Step 9S under SOFTENER
SYSTEM SETUP):
1. Press the "REGEN" button once. REGEN TODAY will flash on the display.
2. Press and hold the "REGEN" button for three seconds until a regeneration begins.
Once the valve has completed the immediate regeneration, the valve will regenerate one more time at the preset
regeneration time.

GENERAL INSTRUCTIONS

27 gpm (102.2 lpm) @ 15 psi (103 kPa)
27 gpm (102.2 lpm) @ 25 psi (172 kPa)
20 psi (138 kPa) - 125 psi ( 862 kPa)
40∞F (4∞C) -110∞F (38∞C)
0.5 amperes
0.5 gpm (1.9 lpm)
(a) 1" NPT elbow
(b) 3/4" & 1" PVC solvent weld socket
(c) 1" straight brass sweat fitting
(d) 3/4" straight brass sweat fitting
1.05" O.D. (3/4" U.S. PVC Pipe Size)
2Ω" - 8 NPSM
Nonvolatile EEPROM
(electrically erasable programmable read only
memory)
sodium chloride, potassium chloride, potassium
permanganate, sodium hydroxide, hydrochloric acid
sodium bisulfite, sodium hydrosulfite, chlorine,
chloramines
page 2
∆ ∆ ∆ ∆ P
∆ ∆ ∆ ∆ P
110 volts