Keypad Test - Kodak dryview 8300 User Manual

User Guide

Keypad Test

Before you can run a keypad test, a remote keypad must be attached to the imager.
To run a Keypad Test for one of the input modules:
1. From the Print SMPTE Pattern display, press
menu.
2. To start the Keypad Test, press
During the first part of the keypad test, the menu shows test progress.
3. When the first part of the test is complete, the menu prompts you to press any
key. To test individual key function, press each key in turn.
Each time you press a key, the menu should identify the pressed key.
Example: If you press
4. To cancel the test, press
OPERATOR" message.
5. To return to the first Keypad Test menu, press
6. To perform the keypad test on the other input module, press
steps 2 through 5.
4-18
.
Enter
, the menu should show that you pressed it.
Select
. The system displays a "TEST CANCELLED BY
Exit
to access the Keypad Test
.
Exit
and repeat
1340744 2002 March Rev. E