Casio 3433 Operation Manual

MA1401-EA © 2014 CASIO COMPUTER CO., LTD.
About This Manual
E
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-7
To toggle the Timekeeping Mode time between DST and Standard Time ....... E-10
To toggle between 12-hour and 24-hour timekeeping ....................................... E-11
To view the time for another city code ................................................................ E-12
To toggle a city code time
between Standard Time and Daylight Saving Time ........................................ E-13
To measure times with the stopwatch ................................................................. E-15
To use Auto-Start .................................................................................................. E-16
To confi gure the countdown timer ...................................................................... E-20
To use the countdown timer ................................................................................. E-22
To set an alarm time .............................................................................................. E-25
E-2
General Guide
Press C to change from mode to mode.
In any mode (except when a setting screen is on the display), press B to illuminate
the display.
Timekeeping Mode
E-4
Timekeeping
Day of week
Month – Day
PM indicator
Hour : Minutes Seconds
E-6
3. When the setting you want to change is fl ashing, use D and B to change it as
described below.
Screen
Reset the seconds to
Toggle between Daylight Saving Time
( ) and Standard Time (
Specify the UTC offset
Change the hour or minutes
Change the year
Change the month or day
See "Daylight Saving Time (DST)" on page E-9 for details about DST setting.
For details about the UTC offset, see the "City Code Table" at the back of this
manual.
The UTC offset setting range is –12.0 to +14.0, in 0.5-hour units.
E-8
Operation Guide 3433
Depending on the model of your watch, display text
appears either as dark fi gures on a light background or
light fi gures on a dark background. All sample displays
in this manual are shown using dark fi gures on a light
background.
Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the "Reference" section.
World Time Mode
C
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select the UTC offset before you set the time and date.
To do this: Do this:
Press D.
Press D.
)
Use D (+) and B (–).
Use D (+) and B (–).
Contents
General Guide .......................................................................................................... E-4
Timekeeping ............................................................................................................. E-6
World Time ............................................................................................................. E-12
Stopwatch .............................................................................................................. E-14
Countdown Timer .................................................................................................. E-17
Alarms .................................................................................................................... E-23
Illumination ............................................................................................................ E-30
Reference ............................................................................................................... E-34
Specifi cations ........................................................................................................ E-42
To test the alarm .................................................................................................... E-27
To turn an alarm on and off .................................................................................. E-28
To turn the Hourly Time Signal on and off .......................................................... E-29
To illuminate the display ....................................................................................... E-31
To specify the illumination duration .................................................................... E-31
To turn the auto light switch on and off .............................................................. E-33
To turn Flash Alert on and off .............................................................................. E-35
To turn the button operation tone on and off ..................................................... E-36
Stopwatch Mode
C
To set the time and date
UTC Offset
C
Seconds
C
Flash Alert
C
When DST is turned on, the UTC offset setting range is –11.0 to +15.0, in
0.5-hour units.
For information about Flash Alert, see "Flash Alert" (page E-34).
4. Press A to exit the setting screen.
The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
Countdown Timer Alarm Mode
Mode
C C
C
1. In the Timekeeping Mode, hold down A until the
seconds start to fl ash, which indicates the setting
screen.
2. Press C to move the fl ashing in the sequence shown
below to select other settings.
C
DST UTC Offset
Day Month Year
C C
E-1
E-3
E-5
C
Hour
C
Minutes
C
E-7
E-9