Table of Contents
Advertisement
Battery installation & charging
After installation, place the handset in the charger or the
telephone base and allow the battery pack to charge for
at least 6 hours before use. You can keep the battery
pack charged by returning the handset to the charger or
the telephone base after use. When battery power is fully
depleted, a full recharge takes about 6 hours.
Insert supplied bat-
tery as indicated.
The top edge (with
contacts and tab)
needs to be inserted
first, then push down
on the lower portion.
1
2
Plug power cord into jack
on underside of charger,
then plug power adapter
into electrical outlet.
NOTE: When fully
charged, the battery
in the handset can provide
5 hours of talk time or 3
days of standby time (when
idle).
Low battery indicator
Return handset to telephone base or charger
to recharge when this symbol flashes.
(Handset will beep when battery is low.)
12:00AM
REDIAL
supplied rechargeable
battery or AT&T
replacement battery
model 103 (SKU 00249.
Part Number 89-0429-
00-00).
Replace compartment cover.
Place handset in charger to
charge for at least 16 hours
before first use.
CHARGE
FLASH
CANCEL
while charging.
HANDSET 2
Low Battery
CALLER ID
Caution: Use only
light remains on
Advertisement
Table of Contents
