AT&T EP590-3 User Manual page 16

5.8 ghz expansion handset for use with at&t model ep5995
Table of Contents

Advertisement

In case of difficulty
There is no
dial tone.
The telephone
does not ring
when there is
an incoming
call.
• First, try all the above suggestions.
• Move the cordless handset closer to the tele-
phone base. It might be out of range.
• The telephone line cord might be malfunction-
ing. Try installing a new telephone line cord.
• Disconnect the base unit from the telephone
jack and connect a different telephone. If
there is no dial tone on the telephone either,
the problem is in your wiring or local service.
Contact your local telephone company.
• Make sure the ringer is on.
• Make sure the telephone line cord and power
adapter are plugged in properly.
• The cordless handset may be too far from the
telephone base. Move it closer to the tele-
phone base.
• There may be too many extension phones on
the telephone line to allow all of them to ring
simultaneously. Try unplugging some of them.
• If the other telephones in your home are hav-
ing the same problem, the problem is in the
wiring or local service. Contact the local tele-
phone company (charges may apply).
• Other electronic products can cause interfer-
ence to your cordless telephone. Try installing
your telephone as far away as possible from
the following electronic devices: wireless rout-
ers, radios, radio towers, pager towers, cel-
lular telephones, digital telephones, intercoms,
room monitors, televisions, VCRs, personal
computers, kitchen appliances, and other
cordless telephones.
• Test a working telephone at the telephone
jack. If another telephone hast he same


Advertisement

Table of Contents
loading

This manual is also suitable for:

Ep5995

Table of Contents

Save PDF