Legacyselect Technology Control; Alert Standard Format; Dell Openmanage It Assistant; Dell Openmanage Client Instrumentation - Dell OptiPlex SX280 User Manual

6. Connect your computer and devices to electrical outlets, and turn them on.

LegacySelect Technology Control

LegacySelect technology control offers legacy-full, legacy-reduced, or legacy-free solutions based on common platforms, hard-drive images, and help desk
procedures. Control is provided to the administrator through system setup, Dell OpenManage™ IT Assistant, or Dell™ custom factory integration.
LegacySelect allows administrators to electronically activate or deactivate connectors and media devices that include serial and USB connectors or a parallel
connector. Connectors and media devices that are deactivated make resources available. You must restart the computer to effect the changes.
Manageability

Alert Standard Format

ASF is a DMTF management standard that specifies "pre-operating system" or "operating system-absent" alerting techniques. The standard is designed to
generate an alert on potential security and fault conditions when the operating system is in a sleep state or the system is powered down. ASF is designed to
supersede previous operating system-absent alerting technologies.
Your computer supports the following ASF version 1.03 alerts and remote capabilities:
Alert
Chassis: Chassis Intrusion – Physical Security Violation/Chassis Intrusion –
Physical Security Violation Event Cleared
CPU: Emergency Shutdown Event
Cooling Device: Generic Critical Fan Failure/Generic Critical Fan Failure
Cleared
Temperature: Generic Critical Temperature Problem/Generic Critical Temperature
Problem Cleared
Battery Low
For more information about Dell's ASF implementation, see the ASF User's Guide and the ASF Administrator's Guide, which are available on the Dell Support
website at support.dell.com.

Dell OpenManage IT Assistant

IT Assistant configures, manages, and monitors computers and other devices on a corporate network. IT Assistant manages assets, configurations, events
(alerts), and security for computers equipped with industry-standard management software. It supports instrumentation that conforms to SNMP, DMI, and CIM
industry standards.
Dell OpenManage Client instrumentation, which is based on DMI and CIM, is available for your computer. For information on IT Assistant, see the Dell
OpenManage IT Assistant User's Guide available on the Dell Support website at support.dell.com.

Dell OpenManage Client Instrumentation

Description
The computer chassis has been opened or the chassis intrusion
alert has been cleared.
The processor temperature is too hot and the power supply has
shut down.
The fan speed (rpm) is out of limits or the fan speed (rpm)
problem has been resolved.
The computer temperature is out of limits or the computer
temperature problem has been resolved.
The system battery has reached a voltage of 2.2V or lower.