Deleting Memory Pages; Deleting Images From Memory - Casio QV-200 Owner's Manual

Deleting Memory Pages

Use the procedures described in this section to delete memory
pages. You can delete individual pages, or all the pages currently
stored in memory.
Warning!
The delete operation cannot be undone!
Before performing any of the procedures described in this section,
make sure that you really do not need the images recorded on the
memory pages you are deleting. Be especially careful when you are
using the all delete operation.

Deleting Images From Memory

• Note that you cannot delete images if they are protected. See page
50 for details on how to unprotect images.
• You cannot delete images from a multi-page display, a display of an
enlarged image, or while Auto Playback is operating.
To delete a single image
1.
Select the Playback Mode and turn on power.
• Slide the function switch to the PLAY position.
• Slide the POWER switch in the direction indicated by the
arrow.
2.
Display the DELETE Menu.
• Press the DEL button to display
the DELETE Menu.
Note
• Deleting a page causes the remaining pages to be renumbered.
Blank pages are not left inserted between non-blank pages.
1 2
1 2
Deleting Memory Pages
53
Deleting Memory Pages
3 4
3
55
Operation
3.
Select "PAGE".
• Use [+] and [–] to select "PAGE".
• To clear the selection screen and quit this procedure, select
the EXIT icon.
4.
Press the shutter button.
5.
Use [+] and [–] to display the image you want to delete.
• Any images that are protected
(page 48) do not appear on the
screen during this operation.
6.
Double check to make sure that you really want to delete
the image that is on the screen.
• To abort the delete operation without deleting anything,
press any button other than [+], [–], or the shutter button.
7.
Press the shutter button to delete the page.
• After you delete an image, the image on the next page ap-
pears on the screen.
8.
To delete more images, repeat steps 5 through 7.
• After you finish deleting all the images you want, press any
button other than [+], [–], or the shutter button to clear the
image delete screen.
54
Operation
To delete all images in memory
1.
Enter the Playback Mode.
• Slide the function switch to the PLAY position.
2.
Display the DELETE Menu.
• Press the DEL button to display
the DELETE Menu.
3.
Select "ALL".
• Use [+] and [–] to select "ALL" and press the shutter button.
4.
Select "ALL".
• Use [+] and [–] to select "ALL".
• To clear the selection screen and
quit this procedure, select the
EXIT icon.
5.
Press the shutter button to delete all images from memory.
• After all images are deleted, the message "MEMORY
EMPTY" appears on the screen.
• If you perform the above operation while protected images
are hidden, the message "ALL DATA IS PROTECTED!" ap-
pears on the screen.
56