Changing The Operational Amplifier - Gigabyte GA-Z170X-Gaming 7 User Manual

Voltage Measurement Points
Use a multimeter to measure the following motherboard voltages. You can employ following way to measure
component voltages.
1-9 Changing the Operational Amplifier
For purchasing the IC extractor and OP Chip, please contact the local dealer.
S S 3 S 3 S 3 S 3 S 3
S S _ S _ S _ S _ S _ S _ S _ _
Steps:
Connect the red lead of the multimeter to the pin 1 (Power) of a voltage
measurement point and the black lead to the pin 2 (ground).
S S _ S _ S _ S _ S _ S _ S _ _
Step 1:
Use an IC extractor to carefully grip the IC's sides and extract it from
S S _ S _ S _ S _ S _ S _ S _ _
the socket.
Step 2:
Align the notch on your OP chip with the notch on the socket and
gently press the chip into the socket until seated.
- 25 -
S S
1 2 3
S S S S S S S S
B S S B S S B S S S B S S S B S S S B S S S B S S S B S S S S
S 3 S 3 Pin No. Definition 3
1 Power
2 GND
S F S F S F S F S F S F S F S F
B_ B_ B_ B_ B_ B_ B_ B_
Hardware Installation
S S S S S S
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
U U U U U U U U
S
_ _ _ _ _ _ 3 _ _ 3 _ _ 3 _ 3