Theft Protection, Keycard - Blaupunkt San Francisco CD70 Operating Instructions Manual

THEFT PROTECTION

Theft protection, KeyCard

A KeyCard is supplied along with the radio.
The car radio can also be used with a sec-
ond KeyCard.
If a KeyCard is lost or damaged, you can ob-
tain a replacement KeyCard through a Blau-
punkt dealer.
If you use two KeyCards, the settings of the
first KeyCard also apply to the second Key-
Card. You do, however, have the option of stor-
ing the following functions individually:
station-button allocation, traffic-information
volume, beep volume, equaliser setting.
In addition, the last set values for wavelength,
station settings, scanning time and switch-
on volume remain stored.
This means that you always have your se-
lected basic setting after inserting the Key-
Card.
Inserting the KeyCard
button 1.
Press the
The operating panel opens.
Insert the KeyCard with the contact sur-
faces facing down as illustrated in the
picture (arrow 1).
3
Carefully place the KeyCard on the car-
riage and slide it in as far as it will go in
the direction of the arrow (2).
Close the operating panel (arrow 3).
42
1
Note:
If a wrong card, e.g. a cash card, is introduced
into the car radio, "Wrong KC" will appear on
the display.
Remove the wrong card and slide in a Key-
Card your unit will recognise.
Removing a KeyCard
In order to unlock the operating panel,
button 1.
press the
The operating panel then opens.
Place the card on the carriage and slide
as far to the right as it will go.
Pull the card out of the operating panel.
Close the operating panel.
Note:
In order to prevent theft, remove the KeyCard
when you leave the vehicle and leave the op-
erating panel open.
For safety reasons, the operating panel
should always be locked when the vehicle
is in motion.
Making a second KeyCard "learn"
the code Replacing a KeyCard
You can use the first KeyCard to make a sec-
ond KeyCard "learn" to be an additional Key-
Card when the car radio is in operation.
If you want a second KeyCard to "learn" the
code,
insert the first KeyCard and switch the
radio on;
press the MENU button 8.
press the soft key 4 with the display
allocation "KC";
press the soft key 4 with the display
allocation "LRN".
"LEARN KC" appears on the display.
Remove the first KeyCard.
"INSERT" appears on the display.