Table of Contents
Advertisement
To pair with an Apple® Mac
Please note on Mac the number keys are permanently active, so Number Lock will not operate.
1.
Select 'Bluetooth' from the System Preferences menu on your Mac
2.
On the keyboard rear edge, slide the keyboard ON/OFF switch to the ON position
3.
Press the 'CONNECT' button on the rear edge of the keyboard. The power light should flash
until pairing is complete
4.
On your Mac's Bluetooth window find 'Posturite KB Number Slide' and click 'Pair'
5.
To un-pair at any time, simply delete from the list of Bluetooth items
To pair with an Apple® iPad or iPhone
1.
Make sure Bluetooth is turned on on your iOS device and keyboard is on
2.
Press the 'CONNECT' button on the rear edge. The power light should flash until pairing is
complete
3.
In the Bluetooth section on the iPad, select the 'Posturite KB Number Slide'
4.
To un-pair at any time, simply delete from the list of Bluetooth items
Please note: If you have difficulty connecting the Number Slide at any time, delete the keyboard
from your list of Bluetooth items and start the process again.
Warning lights
a.
Number lock (Number Lock key found on slide out number pad)
b.
Caps lock
c.
Power light - Charge Number Slide when light flashes or remains on
Charging (Blutooth version)
When voltage is low, the battery light will flash. This means that your keyboard needs charging.
1.
Insert the USB end of the charging cable into a USB port directly into your computer (do not
use a multi-port hub) and the micro USB end into the back of your Bluetooth Number Slide
Keyboard
2.
While charging the red LED light will remain on
3.
When charged the red LED light will turn off (Approx 2 hours)
Sleep function
After 5 minutes of inactivity the battery will enter a power-saving sleep mode. Press any key to
wake up the keyboard.
For up to date support please visit www.posturite.co.uk/numberslide
Models covered by this manual:
9820010 - Wired UK
9820011 - Bluetooth UK
9820012 - Wired US
9820013 - Bluetooth US
Advertisement
Table of Contents
Need help?
Do you have a question about the Number Slide and is the answer not in the manual?
Questions and answers
When I charge it, the red light doesn’t show up, but if I touch it then it shows up
If the red light does not show up when charging the Posturite Number Slide, possible reasons include:
1. Improper Connection – Ensure the USB end is directly connected to a computer's USB port (not a multi-port hub) and the micro USB end is properly inserted into the keyboard.
2. Faulty Cable or Port – Try using a different USB cable or port to check if the issue persists.
3. Battery Already Fully Charged – The red LED light turns off when charging is complete.
4. Battery or Hardware Issue – If the keyboard does not charge or function, the battery or internal components may be faulty.
Checking these factors can help identify the cause of the issue.
This answer is automatically generated