Do you have a question about the Number Slide and is the answer not in the manual?
Questions and answers
Xovade
March 25, 2025
When I charge it, the red light doesn’t show up, but if I touch it then it shows up
1 comments:
Mr. Anderson
March 25, 2025
If the red light does not show up when charging the Posturite Number Slide, possible reasons include:
1. Improper Connection – Ensure the USB end is directly connected to a computer's USB port (not a multi-port hub) and the micro USB end is properly inserted into the keyboard. 2. Faulty Cable or Port – Try using a different USB cable or port to check if the issue persists. 3. Battery Already Fully Charged – The red LED light turns off when charging is complete. 4. Battery or Hardware Issue – If the keyboard does not charge or function, the battery or internal components may be faulty.
Checking these factors can help identify the cause of the issue.
This answer is automatically generated
Summary of Contents for Posturite Number Slide
Page 1
The Number Slide allows your mouse to be positioned in front of your left or right shoulder (depending in which hand you use your mouse), which encourages a good arm/shoulder position when using your mouse.
Page 2
Press the ‘CONNECT’ button on the rear edge. The power light should flash until pairing is complete On your PC control panel, select Posturite KB Number Slide To un-pair at any time, simply delete from the list of Bluetooth items...
Page 3
When voltage is low, the battery light will flash. This means that your keyboard needs charging. Insert the USB end of the charging cable into a USB port directly into your computer (do not use a multi-port hub) and the micro USB end into the back of your Bluetooth Number Slide Keyboard...
Need help?
Do you have a question about the Number Slide and is the answer not in the manual?
Questions and answers
When I charge it, the red light doesn’t show up, but if I touch it then it shows up
If the red light does not show up when charging the Posturite Number Slide, possible reasons include:
1. Improper Connection – Ensure the USB end is directly connected to a computer's USB port (not a multi-port hub) and the micro USB end is properly inserted into the keyboard.
2. Faulty Cable or Port – Try using a different USB cable or port to check if the issue persists.
3. Battery Already Fully Charged – The red LED light turns off when charging is complete.
4. Battery or Hardware Issue – If the keyboard does not charge or function, the battery or internal components may be faulty.
Checking these factors can help identify the cause of the issue.
This answer is automatically generated