Table of Contents
Advertisement
DVD TEST MODE
There are three types of DVD test mode which are described below.
Use any of the test modes as required.
1. Status/Media Display Mode
1-1.
Starting Status/Media Display Mode
Connect the AC plug while pressing and holding down the DISC PLAY/BAND button.
When the FL display lights up, the test mode is activated.
1-2.
Exiting Status/Media Display Mode
Unplug the AC plug.
The following are alternative ways to exit the mode:
• Switch functions by pressing the function buttons except the DVD/CD button.
• Press the POWER button.
1-3.
Status/Media Display Mode Functions
The FL display appears "S** M**" while Status/Media Display Mode is on.
"S**" shows status.
Status Display
S41
S42
S43
S44
S45
S46
S47
S48
S49
"M**" shows media types.
Media Display
M00
M21
M22
M23
M24
M25
Any information, other than the above status and media (figures), implies that all data is invalid.
Normal display
While the DVD/CD button is being pressed during Status/Media Display Mode activation, the mode is in normal display.
Description
PICK-UP inner track STOP
PICK-UP inner track resume-data STOP
PLAY
PAUSE
SKIP
TOC READ
Signal for EEPROM WRITE end
Status undetermined
Signal for DISC END
Description
DISC search
NO DISC
CD-DA
VCD(Ver1.0 or Ver1.1)
VCD(Ver2.0)
DVD
– 42 –
Advertisement
Table of Contents
