Vita Mobility Werks V19 User Manual page 5

Table of Contents

Advertisement

25.     Surface   t emperatures   c an   i ncrease   w hen   e xposed   t o   e xternal   s ources   o f   h eat.  
u Modifications
Vita Mobility Werks has designed and engineered power scooters to provide maximum utility. However, under
no circumstances should you modify, add, remove, or disable any part or function of your power scooter.
Personal injury and damage to the power chair may result.
1. Do not modify your power scooter in any way not authorized by VMW. Do not use accessories if they have
not been tested or approved for VMW products.
u Inspections prior to using your power scooter:
1. If equipped with pneumatic tires, please check for proper tire inflations.
2. Please check all electrical connections and make sure they are tight and not corroded.
3. Please check all harness connections and make sure they are secured properly.
4. Please check the brakes.
u Weight limitation.
1. Please refer to the specifications table for weight capacity information. Power scooter is rated for a
maximum weight capacity.
2. Stay within the specified weight capacity for your scooter. Exceeding the weight capacity voids your
warranty. VMW will not be held responsible for injuries or property damage resulting from failure to
observe weight limitations.
3. Don't carry passengers on scooters. Carrying passengers on scooter may affect the center of gravity,
resulting in a tip or a fall.
u Tire inflation
1.
If your scooter is equipped with pneumatic tires, it is necessary to check the air pressure at least one time a
week.
2.
Proper inflation pressures will prolong the life your tires and ensure the smooth operation while riding.
3.
Do not under-inflate or over-inflate your tires. It is critically important that 30-25 psi (2-2.4bar) tire
pressure be maintained in pneumatic tires at all times.
4.
Inflating your tires from an unregulated air source could over-inflate them, resulting in a burs tire.
u Temperature
1.
Some of the parts of the power scooter are susceptible to change in temperature. The controller can only
operate in temperature that ranges between -25°C ~ 50°C.
2.
At extreme low temperatures, the batteries may freeze, and your power scooter may not be able to operate.
In extreme high temperatures, it may operate at slower speeds due to a safety feature of the controller that
prevents damage to the motors and other electrical components.
5
www.vitamobilitywerks.com

Advertisement

Table of Contents
loading

Related Products for Vita Mobility Werks V19

This manual is also suitable for:

V19a

Table of Contents