Panasonic KY-B84BXBXD Service Manual page 48

Right rear IH coil assembly
Note:
When setting the IH coil, be sure to set the holes of the IH
coil to the guides, and check that the IH coil moves up and
down.
10.4.3. Operation Unit
1. Unplug Control lead wire C connector (CN6).
2. Unplug Control lead wire D connector (CN6).
3. Remove Operation unit fixing Screw E (2 pcs) and Screw
C (1 pcs).
Screw E: Panhead P-tite screw 4+12
Screw C: Panhead Deltite screw 4+25
4. Remove the Operation unit.
48