7.3.
Integral power consumption display mode
In this mode, a rough estimate of integral power consumption is shown.
Operating procedures
How to operate (Each button operation has a buzzer sound.)
1.Turn the main power switch on.
2.Within 3 seconds, simultaneously press the heating Down button of
the left rear IH heater and the Timer (-) button.
3.Press the left rear heater (Off/On) button.
4.A rough estimate of integral power consumption is shown.
To see the lower digit.
5.Press and hold the Timer button.
Change the display to the integral watt-hour-2.
6.Press the Timer (+) button.
Reset the integral watt-hour-2
7.Press the left front heater (Off/On) button in integral watt-hour-1 mode.
How to exit from this mode
Turn the main power switch off.
Note: The detailed aspects of integral watt-hour-1 and 2
Operation
Indicators on the operation panel
①
②
③
④
⑤
Summing up the digits, the integral watt-hour for the above example is
123.018 kWh.
⑥ Shows integral watt-hour-1
The memory of integral watt-hour-1 is reset to zero.
30