Table of Contents
Advertisement
TG5471C(E).fm Page 21 Sunday, February 13, 2005 6:10 PM
Ringer Tone
You can set the handset and base unit ringers to use one of 7 ringer patterns for
outside calls. "Tone 1" to "Tone 3" are bell ringer patterns. "Melody 1" to "Melody 4"
are preset melody patterns. The factory preset is "Tone 1".
• You cannot change the ringer tone for intercom calls.
• If you subscribe to a Distinctive Ring Service from your telephone company with 2
or 3 distinct rings, select a bell ringer pattern (Tone 1 to 3). If you select a melody
pattern, you will not be able to distinguish lines by their ringers.
• If you select one of the melody ringer patterns, the ringer will continue to sound for
several seconds if:
— the caller hangs up before you answer the call, or
— another person answers the call using another phone connected on the same line.
Handset ringer tone
1
Press [MENU].
2
Press the soft key (
setting".
3
Scroll to "Ringer tone" by pressing [d] or
[B], then press the soft key (
4
Select the desired ringer tone by pressing
[d] or [B].
• The handset will ring and the ringer tone will
change. If the ringer volume has been turned off,
the handset will not ring (p. 19).
• You can also select the ringer tone by pressing
[1] to [7].
5
Press the soft key (
Base unit ringer tone
Base Unit
Make sure the base unit is not being used.
1
Press [<] or [>].
• The base unit will ring using the current ringer tone. If the ringer volume has
been turned off, the base unit will not ring (p. 20).
2
Press [<] or [>] repeatedly to select the desired tone.
• Each time you press [<] or [>]
selected.
• To stop ringing, press [STOP].
• You can also select the ringer tone by pressing [1] to [7].
[1] to [3]: Bell ringer patterns
Programmable Settings
Handset
) at "Ringer
SELECT
).
SELECT
), then press [OFF].
SAVE
(use either the handset or the base unit)
,
another ringer tone will be heard and
[4] to [7]: Melody patterns
Ringer setting
Ringer tone
Ringer tone
1:Tone 1
21
Advertisement
Table of Contents
