Volume; Alert - Audiovox CDM-8910 Owner's Manual

SETTINGS

VOLUME

Controls the Ringer, Key Tone, Voice Call and Speaker Phone volume.
RINGER
Controls the Ringer volume and alerts you to incoming calls in the
modes listed in the gray box below.
1
Press [MENU]
2
Select one of the following options by
pressing the Navigation Key to the right.
Silent : Mute the ringer, press
Ringer Off
Vibrate On
Ringer Mode : Up & Down (Level 1~5)
High & Vib : The ringer sounds after vibration,
C
press
H
3
To confirm, press
4
KEY TONE
To adjust key pad tone:
1
Press [MENU]
2
Adjust the key pad tone with the Navigation Key.
Off (Min- )
Level 1 - 5 (level 5, Max-
3
To save, press
VOICE CALL
To adjust earpiece volume:
1
Press [MENU]
2
Adjust the earpiece volume with the Navigation Key.
Level 1 - 5 (Min-
3
To save, press
.
(Min).
(Max).
[OK].
.
)
[OK].
.
, Max- )
[OK].
58
SETTINGS
SPEAKER PHONE
To adjust speaker phone volume:
1
Press [MENU]
2
Adjust the speaker phone volume using the
Navigation Key.
Level 1 - 5 (Min- , Max-
3
To save, press [OK].

ALERT

When selected, this setting alerts you to the following handset changes:
MINUTE
Sounds an alert every minute during a call.
1
Press [MENU]
2
Select "Off" or "On" with the Navigation Key then
press [OK] to save it.
ROAM
Sounds an alert when leaving a service area and entering a roaming
service area.
1
Press [MENU]
2
Select "Off" or "On" with the Navigation Key then
press [OK] to save it.
CONNECT
Notifies you that a call has been successfully placed.
1
Press [MENU]
2
Select "Off" or "On" with the Navigation Key then
press [OK] to save it.
59
.
)
C
H
4
.
.
.