Dimensions; Setting Up To Get Going - Quest 88 Trikes User Manual

QD. TRINST1supp.PM6 iss.8/GJ-06/09
2

Dimensions

The trikes come in three sizes, as
detailed below.
b
a
all sizes given in centimetres (cm)
*trike weight will vary with accessories.
**inside leg measurement when leg is slightly flexed. NB: When refering to the trike, left and right hand always denotes left and right
when sitting on the trike.
Before the Trike is Used
Each trike requires setting up when it has been delivered.
A combination tool is supplied with the trike in order for this to be
done. Look after this tool and keep all the parts with it. The spanners
slide out of the tool and the allan keys and screwdriver fold out. The
8mm allan key adapter is stored between the allan keys when the
tool is not in use. To use the 8mm allan key, fit it onto the 6mm allan
key which is part of the tool.
The ends of the spanners can be used as tyre levers. However, they
are not suitable for Quest 88 trike wheels. Use plastic tyre levers
when fixing punctures on Quest 88 trikes.
A pump is also supplied with the trike. Keep the tyres inflated as per
these instructions. Keeping the tyres firm will keep the trike stable
and help prevent punctures.

Setting Up to Get Going

It is essential that time and consideration is taken whilst setting the
trike up to ensure safe and easy use.
The best benefits of using the trike will come through careful and
accurate setting up, which will ensure a positive and active posture.
tel: +44 (0)1952 463050
max user
weight
c
trike
weight*
user leg
length**
Quest 88 limited, Aston Street, Shifnal, Shropshire, TF11 8DW
fax: +44 (0)1952 463077
a
100
b
66
c
70-78
25kg
25kg
33-48
www.quest88.com
Carousel
120
72
85-100 100-115
45kg
28kg
38-58 56-75
email:general@quest88.com
145
83
65kg
35kg