Table of Contents
Advertisement
WARNING
Check that the jack is not damaged, that
the threads are thoroughly lubricated and
that it is free from dirt.
NOTE
Volvo recommends only using the jack*
that belongs to the car model in question,
which is indicated on the jack's label.
The label also indicates the jack's maxi-
mum lift capacity at a specified minimum
lifting height.
2. Take out the jack*, wheel wrench*,
removal tool for wheel covers* and the
plastic wheel bolt cap removal tool. They
will be found in the foam block. If another
jack is selected, see Raising the car
(p. 359).
Tool for removing the plastic caps on the wheel
bolts.
3. Place chocks in front of and behind the
wheels which will remain on the ground to
prevent them from rolling. Use heavy
wooden blocks or large stones for exam-
ple.
09 Wheels and tyres
4. Cars with steel rims have removable
wheel covers. Use the removal tool to
hook in and pull off any full-wheel wheel
covers. Alternatively, the wheel covers
can be pulled away by hand.
*
Option/accessory, for more information, see Introduction.
09
}}
331
Advertisement
Table of Contents
