Table of Contents
Advertisement
Functions
Oil level
A
Messages (##)
Certain engines.
A
Headings
One of the headings in the following table can
be selected for constant display in the com-
bined instrument panel. Proceed as follows to
determine which:
Trip computer heading in combined instrument
panel
T1 and total dist.
Trip meter
Trip meter
T2 and total dist.
Distance to empty
Fuel consumption
Average speed
No trip computer information.
The combined instrument panel's trip com-
puter can be changed to another option at
any time during the journey. Proceed as fol-
lows:
Information
For more information, see Engine oil - checking and filling (p. 364).
For more information, see Messages - handling (p. 108).
1. To ensure that no control is in the middle
of a sequence - "Reset" them first with
two presses on RESET.
2. Turn the thumbwheel - selectable head-
ings for the trip computer are shown in a
loop.
Information
•
Long press on RESET resets trip meter T1.
•
Long press on RESET resets trip meter T2.
For more information - see the section "Range - distance to empty tank" (p. 119).
Current consumption.
•
Long press on RESET resets
This option shows a blank display - it also marks the beginning/end of the loop.
•
Turn the thumbwheel - stop on the
desired heading.
03 Instruments and controls
3. Stop on desired heading.
Average speed
.
Resetting - Trip meter and Average
speed
With the current trip computer heading -
and total dist.
T2 and total dist.
,
03
T1
or
}}
113
Advertisement
Table of Contents
