GE WASR3110 Owner's Manual page 13

Problem
Pilling
Grayed or yellowed
clothes
Washer is noisy
Washer pauses in cycle
Clothes too wet
Possible Causes
Result of normal wear on
poly-cotton blends and
fuzzy fabrics
Not enough detergent
Hard water
Water is not hot enough
Washer is overloaded
Detergent is not
dissolving
Dye transfer
Washer is uneven
Washer load is
unbalanced
The washer normally pauses
between washing steps
Incorrect cycle selected
What To Do
• While this is not caused by the washer, you can slow the
pilling process by washing garments inside out.
• Use more detergent (especially with larger loads).
• Use a water conditioner like Calgon brand or install
a water softener.
• Make sure water heater is delivering water at
120°F.–140°F. (48°C.–60°C.).
• Select load size to match clothes load.
• Add detergent as wash basket fills with water before you
load clothes.
• Sort clothes by color. If fabric label states
unstable dyes may be indicated.
• Make sure washer is level and firm to the floor.
• Push the Cycle knob in to stop the washer, open the lid
and redistribute the load evenly. Close the lid and restart.
• Make sure the cycle selected matches the load you are
washing.
wash separately,
13