Disable The Alarm Permanently; Seconds Time Display; Snooze Alarm Operation; Turning Off Alarm - GE 7-4809 Instructions Manual

Operating the Clock

Turning off Alarm

Silence the alarm momentarily
Press SNOOZE. The alarm will sound again
when the snooze period is over. (see

"Snooze Alarm Operation").

Stop the alarm
Press ON/OFF. Then, the alarm will be on
the following day at the same time.

Disable the alarm permanently

1. Press CANCEL button.
2. The corresponding WAKE indicator will
be flashing.
3. Press WAKE 1 or WAKE 2 button within
3 seconds to deactivate the corresponding
alarm function permanently.
Tip: You can activate the previously
set alarm time by pressing WAKE 1
or WAKE 2 WAKE 2 WAKE 2 WAKE 2 button
WAKE 2
7-4809 EN-US

Seconds Time Display

The unit may display in seconds.
1. Select LOCK in the SET switch.
2. Press REV or FWD to show seconds
display.
3. Release REV or FWD to return to the
hour and minute display.
Snooze Alarm Operation
This operation allows extra sleep time af-
ter the alarm is on. The alarm will be off
by pressing SNOOZE until the snooze pe-
riod is over. Snooze function can be used
repeatedly up to 2 hours. After this, the
alarm will turn off until the next alarm
conditions are met. Set the "quiet" pe-
riod as follow:
1. Press and hold SNOOZE.
WAKE 1 WAKE 1 WAKE 1
WAKE 1
2. Press REV or FWD to set the "quiet"
period (the default time is 9 minutes)
from 1 minute to 30 minutes. Release
button, then, the "quiet" period is set.
8
EN
7
3/29/02, 3:35 PM