Siemens S 65 User Manual page 91

90 Setup
Authentication
Activate or deactivate encrypted
internet dial-up (CSD connections
only).
Fax/data
Fax/data mode using a PC
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
Fax and data services must be ena-
bled by the service provider. There
are variations in fax and data recep-
tion, depending on the network.
Please ask your service provider
about this.
Send voice/fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec. voice/fax
(Only if no special fax or data number
is available).
Start the required communication
program on your PC and select the
function on the phone during the call
(the PC will take over the connec-
tion).
End transmission
End transmission with PC-software
and/or press
Rec fax/data
Your service provider has given you a
number for telephoning and a
fax/data number.
The call is signalled by a special ring-
ing tone and the type of call (fax or
data) is displayed. Now start the
communication program in your PC
b
to receive the fax/data.
.
B
b
b