Sony MHC-RV8 Operating Instructions Manual page 7

5 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Extend the FM lead
antenna horizontally.
AM loop antenna
6 Connect the video input jack of your TV
to the VIDEO OUT jack with the video
cable.
7 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
8 Set the color system according to your
TV while the power is off.
The color system Do this
of your TV
Press ?/1 while holding down
NTSC
GAME EQ. The color system is
set to NTSC.
Press ?/1 while holding down
PAL
MUSIC EQ. The color system is
set to PAL.
Press ?/1 while holding down
AUTO*
MOVIE EQ. The color system is
set to AUTO.
* Your TV automatically changes the color system
according to the input signal.
To connect the optional components
See page 30.
To attach the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
Positioning the speakers
Place the front speakers at an angle of 45
degrees from your listening position. Place the
subwoofer at least 0.3m away from the main
unit.
Main Unit Subwoofer
Front
speaker
(L)
0.3m
45º
Surround
speaker
(L)
MHC-RV8 4-240-082-12 (1)
Front
speaker
(R)
Surround
speaker
(R)
continued
GB
7