Basic Operations; Loading Cut Sheets; Loading Paper Into The Auto Sheet Feeder; Sheet Feeder - Epson SC-p400 series User Manual

SC-P400 Series User's Guide

Basic Operations

Loading Cut Sheets

The method for loading cut sheets varies with the
thickness of the paper. Three methods are available.
❏ Auto sheet feeder: 0.08 to 0.3 mm
❏ Rear manual feed (fine art media): 0.3 to 0.7 mm
❏ Front manual feed (poster board): 0.7 to 1.3 mm
See below for information on the paper that can be
loaded using each method.
"Supported Media" on page 97
U
c
Important:
If the paper is wavy or curled, flatten the paper
before loading it in the printer, or use new paper. If
wavy or curled paper is loaded, this printer may not
be able to recognize the paper size, feed the paper, or
print correctly.
We recommend that you return the paper to its
original package and store it flat, and take it out of
the package just before you use it.
Loading Paper into the Auto

Sheet Feeder

A
Turn on the printer.
Basic Operations
B
Open and fully extend the paper support.
C
Open and fully extend the output tray.
19