Table of Contents
Advertisement
Troubleshooting Proto-Sound
Although Proto-Sound 2.0 has been designed and engineered for ease of use,
you may have some questions during initial operation. The following table
should answer most questions. If your problem cannot be resolved with this
table, contact M.T.H. for assistance (telephone: 410-381-2580; fax:
410-423-0009; e-mail: service@mth-railking.com, mail: 7020 Columbia
Gateway Drive, Columbia MD 21046-1532).
Starting Up
When I first turn the power on, the
engine will not begin to run. I have to
turn the throttle off and then on again
to get the engine to operate.
Horn
When I press the whistle button, the
bell comes on instead.
I can't get the horn to blow when I
press the whistle button.
Bell
When I press the whistle button, the
bell sounds.
I can't get the bell to ring when I press
the bell button.
The bell won't work on a separate bell
button.
Tinplate Traditions 408E Electric Engine
®
2.0 Problems
Remedy
This is normal behavior. To prevent
accidental high-speed start-ups,
Proto-Sound 2.0 is programmed to
start up in neutral anytime track power
has been turned off for several
seconds. See the "Basic Operation"
section for more details.
Remedy
Reverse the transformer leads.
You may be pressing the button too
Remedy
quickly. Try pressing the whistle button
more slowly, taking approximately one
full second to fully depress the button.
Remedy
Reverse the transformer leads.
You may be pressing the button too
quickly. Try pressing the bell button
more slowly, taking approximately one
full second to fully depress the button.
Check the wiring of the separate
button.
14
Advertisement
Table of Contents
