Setup; Setup Operation; Wireless (Bluetooth) Setup - Alpine X901D Owner's Manual

Setup

Setup Operation

1
Press the MENU button.
The Menu screen is displayed.
• You can also display the menu screen, by touching [
on the lower part of the Audio source screen or by swiping upward.
[Setup] button
2
Touch [Setup].
The Setup main screen is displayed.
3
Touch the required setting icon on the upper part of the
Setup main screen or swipe the list area vertically, then
touch the setting item.
Setting items:
Wireless: See "Wireless (Bluetooth) Setup" (page 27).
General: See "General Setup" (page 30).
Audio: See "Audio Setup" (page 40).
System: See "System Setup" (page 44).

Wireless (Bluetooth) Setup

[Wireless] is selected on the Setup main screen in step 3. See "Setup
Operation" (page 27).
Wireless Setup Menu screen
]
<Setting items>
Bluetooth
Bluetooth Information*
Set Bluetooth Device*
iPhone Auto Pairing*
Phone
Passcode Change
Default Phonebook Encoding
Phone Speaker
* This setting is only available when "Bluetooth" is set to "On" (
The following steps 1 to 3 are common to each "Setting
item" of Wireless Setup. See each section for details.
1
Select the desired item.
2
To switch the setting, touch [ ], [ ], [ ], [ ], or mark the
checkboxes "Off"(
• If " " appears, there is a further hierarchy. Touch the desired
item.
3
Touch [ ] to return to the main source screen.
• To return to the previous List screen, touch [ ] or [ ] in the
previous page. For details, see "About Basic Operation for List
Screen" (page 17).
) or "On"( ).
27
).
-EN