10. TECHNICAL DATA ............13 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind.
ENGLISH SAFETY INSTRUCTIONS In the interest of your safety and to ensure Keep ventilation openings, in the appli- the correct use, before installing and first ance enclosure or in the built-in structure, using the appliance, read this user manual clear of obstruction. carefully, including its hints and warnings.
Power cord must not be length- 1.5 Installation ened. For electrical connection carefully Make sure that the power plug is follow the instructions given in not squashed or damaged by the specific paragraphs. back of the appliance. A squashed or damaged power plug may over- •...
ENGLISH obtain from your local authorities. exchanger. The materials used on Avoid damaging the cooling unit, this appliance marked by the sym- especially at the rear near the heat are recyclable. 2. CONTROL PANEL Temperature indicator LED right. Corresponding LED will blink for a while.
This function stops automatically after 52 hours. 3. FIRST USE smell of a brand-new product, then dry 3.1 Cleaning the interior thoroughly. Before using the appliance for the first Do not use detergents or abrasive time, wash the interior and all internal ac-...
ENGLISH will hear a whirring sound and a pulsat- • do not store warm food or evaporating ing noise from the compressor. This is liquids in the refrigerator correct. • do cover or wrap the food, particularly if • The thermic dilatation might cause a it has a strong flavour sudden cracking noise.
The defrost wa- ter drains out through a trough into a spe- Take care of not to damage the cial container at the back of the appli- cooling system.
Page 9
ENGLISH Problem Possible cause Solution The appliance has no Connect a different electri- power. There is no voltage cal appliance to the mains in the mains socket. socket. Contact a qualified electri- cian. The lamp does not The lamp is in stand-by. Close and open the door.
10 www.electrolux.com 7.1 Replacing the lamp Disconnect the mains plug from the mains socket. Remove the screw from the lamp cover. Remove the lamp cover (refer to the illustration). Replace the used lamp with a new lamp of the same power and specifi- cally designed for household applian- ces.
ENGLISH Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the earth symbol or coloured green and yel- low. Connect the wire coloured blue to the terminal either marked with the letter “N“...
ENGLISH 10. TECHNICAL DATA Dimension of the recess Height 873 mm Width 540 mm Depth 549 mm Voltage 230 V Frequency 50 Hz The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label. 11.
Need help?
Do you have a question about the ERN1401AOW and is the answer not in the manual?
Questions and answers
How do you change the thermostat