Sony MZ-E510 Service Manual page 21

2. MO overall adjustment items
Item No.
716 VC,VR power supply H/L selection
100 R_GRV setting •
Low reflection electrical offset adjustment
112 Laser ON • Focus UP vc correction
ALFA offset adjustment
113 IJ offset adjustment
114 FE offset adjustment
118 Wpp denominator offset adjustment
LPIT adjustment
200 LPIT setting servo OFF
•
561 SLED inward movement
220 Focus servo ON
224 TE offset adjustment 1
221 TE gain adjustment
224 TE offset adjustment 1
232 TE offset adjustment 2
230 Tracking servo ON
236 ABCD gain adjustment
237 KF gain correction
238 RF gain adjustment
244 Focus gain adjustment
245 Tracking gain adjustment
READ GRV adjustment 1
100 R_GRV setting
•
562 SLED outward movement
120 Focus servo ON
122 TON offset adjustment
121 TE gain adjustment
122 TON offset adjustment
123 TEIN offset adjustment
124 TWPP offset adjustment 1
130 Tracking servo ON
131 TWPP offset adjustment 1
136 ABCD gain adjustment
137 KF gain correction
139 ADIP BPF f0 adjustment
144 Focus gain adjustment
145 Tracking gain adjustment
134 TWPP gain adjustment
131 TWPP offset adjustment 1
132 TWPP offset adjustment 2
149 TWPP OP offset adjustment
138 RF gain adjustment
141 FOCUS_BIAS
Focus drive inner/outer circumference difference
549
measurement
562 SLED outward movement
548 Traverse measurement process
035 Stray light offset measurement
100 R_GRV setting
•
Description
servo OFF
servo OFF
servo OFF
Resume Clear
Perform the Resume clear when all adjustments completed.
• Resume clear setting method
1. Select the manual mode of the test mode, and set item number
043 (see page 10).
Remote commander LCD display
043
Resume 00
[VOL +]
2. Press the key once to set the adjusted value to 01.
Remote commander LCD display
043
# # # S 0 1
3. Press the u key or the
Remote commander LCD display
043
Res***
Resume clear complete
043 ResClr
4. Press the x key to return to the test mode (display check
mode).
MZ-E510
key on the remote commander.
21