Auxiliary Function; Starting The Programme; Progress Of Programme; Changing The Programme After It Has Started - Beko DV 1572 X User Manual

5.7 Auxiliary function

Cancel audio warning
Your dryer will give an audio warning when the
programme comes to an end. If you do not want to
hear the audio warning, press "Cancel Audio Warning"
button. The relevant light will turn on when this button
is pressed and an audio warning will not be given when
the programme comes to an end.
C
You can select this function either before or
after the programme starts.
Warning indicators
C
Warning indicators may differ according to
the model of your dryer.
Filter cleaning
A warning light will turn on to remind filter cleaning after
the programme finishes.
C
If the filter cleaning warning light lights up
continuously, please refer to, "Suggested
solutions for problems".
Time delay
If you wish to dry your clothes at a later time, thanks
to the time delay function, you can delay the
programme start up to 3 hours, 6 hours or 9 hours.
1. Open the loading door and put the laundry in.
C
Make sure that all air outlets are open,
door filter is cleaned and the water tank is
empty.
2. Set the drying programme and, if required, the
auxiliary functions.
3. When the time programming button is pressed
once, a 3 hour delay is selected and the relevant
led lights. When the same button is pressed again,
6 hours; and if pressed once more, 9 hours delay
will be selected. If the time programming button is
pressed one more time, time delaying function will
be cancelled. Set the time delay as you require.
4. Delayed operation of the selected programme is
started by pressing the "Start/Pause/Cancel" button
after selecting the time delay.
C
Additional laundry may be loaded / taken
out during the time delay period.
C
During the time delay period, laundry is
rotated for 4 seconds in every 10 minutes
to prevent creasing.
22 / 28 EN
Cancelling the time delay
If you want to cancel the time delay countdown and start
the programme:
1. Press "Start/Pause/Cancel" button for about 3
seconds.
2. Press "Start/Pause/Cancel" button to start the
programme right away.

5.8 Starting the programme

1. Press "Start/Pause/Cancel" button to start the
programme.
2. Light of the "Start/Pause/Cancel" button will turn on
to indicate that the programme has started.

5.9 Progress of programme

Progress of a running programme is shown through the
programme follow-up indicator.
At the beginning of every program step, the relevant
indicator LED will light up and light of the completed
step will turn off.
"Drying":
- Drying level will be illuminated during the whole drying
process until the drying degree reaches "iron dry".
"Iron Dry":
- Starts to illuminate when the drying degree reaches
"iron dry" step and remains illuminated until the next
step.
"Ready to wear":
-Starts to illuminate when the drying degree reaches
"Ready to wear" step and remains illuminated until the
next step.
"Final / Anti-creasing":
- Illuminates when the programme comes to an end and
anti-creasing function is activated.
C
If more than one LED light up or
flash concurrently, it means there is
malfunctioning or a failure (please see,
Solution suggestions for problems).
5.10 Changing the programme after it
has started
You can use this feature to dry your clothes under higher
or lower temperatures after your dryer has started.
For example;
1. Press and hold the "Start/Pause/Cancel" button
for about 3 seconds to "Cancel" the programme in
order to select "Extra Dry" programme instead of
"Iron Dry" programme.
2. Select the "Extra Dry" programme by rotating the
programme selection button.
3. Press "Start/Pause/Cancel" button to start the
programme.
Dryer / User Manual