LG PA1000T Owner's Manual page 7

Make sure that a child does not
y
swallow the batteries when you
replace the old remote control
batteries with new ones. Keep
batteries out of reach of children.
- If a child swallows a battery, consult
a doctor immediately.
Never open any cover on the
y
projector.
- There is a high risk of electric shock.
Do not look directly into the lens
y
when the projector is in use.
- The bright light may damage your
eyes.
When the lamp is on or has just been
y
turned off, avoid touching the air vent
or lamp, because these will be very
hot.
If there is a gas leak in the room
y
with the projector, do not touch the
projector or power outlet. Open the
windows for ventilation.
- Sparks may cause fire or burns.
Unplug the power cord from the outlet
y
during a lightning storm.
- This will prevent shock or damage
to the projector.
Do not use the projector near
y
electronic devices that generate a
strong magnetic field.
Do not put the plastic package used
y
to pack the projector around your
head.
- This may cause suffocation.
Do not keep your hand on the
y
projector for a long time when it is
running.
SAFETY INSTRUCTIONS
When you play a game by connecting
y
a game console to a projector, it is
recommended that you maintain a
distance of more than four times the
diagonal length of the screen.
- Make sure that the connecting
cable is long enough. Otherwise, the
product may fall causing personal
injury or damage to the product.
Do not place the projector or its
y
remote control with battery in
an extremely high temperature
environment.
- This may result in fire.
Do not use 3D glasses if you do not
y
watch 3D.
CAUTION
Do not place heavy objects on the
y
projector.
- It may fall down and cause personal
injury.
Be careful not to allow any impact to
y
the lens during transport.
Do not touch the lens of the projector.
y
- The lens may be damaged.
Do not use any sharp tools on the
y
projector such as a knife or hammer,
because this may damage the casing.
In the event that no image appears
y
on the screen or no sound is heard,
stop using the projector. Switch off
the projector, unplug it from the power
outlet and contact our service centre.
- This may result in fire or electric
shock.
7