LG PA1000T Owner's Manual page 58

58
CUSTOMIZING SETTINGS
Item
Colour In Expert mode, you can customize the options of each mode.
Temperature
Gamma: Select 1.9, 2.2, or 2.4.
a. Method: 2 Points
- Pattern: Inner, Outer
- Points: Low, High
- Red/Green/Blue: Adjustable range -50 ~ +50.
- Apply to all inputs: The values of the Colour Temperature is
b. Method: 20 Point IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit indicating the size
- Luminance: The adjustment range is 50 ~ 500.
- Red/Green/Blue: The adjustment range is -50 ~ +50.
- Apply to all inputs: The values of the Colour Temperature is
Colour Adjusts Red/Green/Blue/Cyan/Magenta/Yellow colours. Allows
Management an expert to adjust the tint using a test pattern. Six colours (Red/
System Green/Blue/Cyan/Magenta/Yellow) can be selectively adjusted without
affecting other colours. You may not see colours change on a normal
picture even after adjustment.
- Saturation Red/Green/Blue/Cyan/Magenta/Yellow,
Tint Red/Green/Blue/Cyan/Magenta/Yellow,
Luminance Red/Green/Blue/Cyan/Magenta/Yellow:
The adjustment range is -30 ~ +30 each.
* Depending on input signal or other picture settings, the range of detailed items for
adjustment may differ.
of a video signal and can be set to 0, 5, 10, 15, ... 100.You can
fine-tune for each setting as shown below.
Description
applied to all the input modes.
applied to all the input modes.