Play Audio Via Bluetooth - Philips BT2600 User Manual

» The Bluetooth indicator flashes blue
quickly and the speaker beeps once.
Note
•
If you want to pair a third device, pause the music
playback one of the connected device first, then press
and hold /MULTIPAIR until you hear a single beep to
enter pairing mode.
•
If there is no Bluetooth connection after 15 minutes,
the speaker goes to standby mode automatically for
power saving.
•
Rotate the knob to turn on the speaker if the
speaker goes to standby mode.
Reconnect a device
• For a paired Bluetooth device on which
the automatic reconnection is enabled,
this product reconnects with it once it is
detected.
• For a paired Bluetooth device that does
not support the automatic reconnection,
reconnect it with this product manually.

Play audio via Bluetooth

Note
•
If there is an incoming call on the connected mobile
phone, audio play pauses.
After successful Bluetooth connection, play
audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to the speaker
Control your phone call
After Bluetooth connection, you can control an
incoming call with this speaker.
Button Functions
Press to answer an incoming call.
During a call, press to end the current
call.
Press and hold to reject an incoming
call.
During a call, press and hold to
transfer the phone call to your mobile.
When there is another incoming call
during a call, you can
• press to end the current call and
answer the another call.
• press twice to reject the another
call.
• press and hold for two seconds to
hang on the current call and answer
the another call.
Note
•
You can talk through the microphone of the speaker.
•
Music play pauses when there is an incoming call, and
resumes when your phone call ends.
EN 7